Benefits

Tetra Pak® Ingredients Dissolver has the flexibility to handle pre-dissolving steps of single ingredients under special conditions separate from the main blend. The unit is designed for wet applications. Any powdered ingredients are poured directly into the liquid, which reduces the release of dust to a minimum and therefore no explosion protection measures are needed.

 

Tetra Pak® Ingredients Dissolver is applicable in every make of beverage line and also in combination with:

  • Tetra Pak® Mixer RJCI 4X
  • Tetra Pak® Preparation System B
  • Tetra Pak® Mixer RJCI B

Tetra Pak® Ingredients Dissolver can also be used as a stand-alone unit on pilot scale to start innovating with new recipes.


Capacity:

Available in a standard tank size of 250 litres and suitable for a batch viscosity of up to 200 cP.

 

Typical applications:

  • Dissolving taurine, dextrose or other ingredients fed in from sacks.
  • Isolated dissolving of single ingredients taking into consideration specific conditions such as acidity, sweetness or other requirements.
  • Emptying of liquid concentrate containers into a downstream line.
  • More applications are possible.
Tetra Pak® Ingredients Dissolver
Tetra Pak® Ingredients Dissolver

The simple way to dissolve complex ingredients

  • A small add-on unit gives greater production flexibility.
  • Efficient operation saves time and maintenance.
Tetra Pak® Ingredients Dissolver

Features

Just dump in lumps

Just dump in lumps

No manual breaking of lumps needed

Taurine is a prime example of a powder that tends to form lumps during storage but there are also other examples such as dextrose and fructose.

Lumps tend to clog up the system. With this unit, there is no need for manual handling to break up lumps. Just dump them into the tank through the hatch opening. The radial jet mixer technology we provide is able to wet these lumps and dissolve them quickly. Therefore, rough handling of lumps to crush them can be avoided.

Suitable for gums, thickeners and stabilisers

Suitable for gums, thickeners and stabilisers

Save energy when dissolving gums

Undissolved dry capsules of powder known as “fish eyes” are typically found when dissolving powders like stabilisers, thickeners or gums if they are not wetted properly. With Tetra Pak® Ingredients Dissolver, the lumps become completely dissolved. There is no need for a high shear mixing device to dissolve these challenging ingredients, saving you energy and a higher initial investment cost in equipment.

Smart water handling

Smart water handling

Complex recipes require careful use of water

The amount of water you can add is limited if you have a number of ingredients to dissolve one by one. So, a careless usage of water in these early steps can lead to recipe challenges down the production line as there might not be enough water left to add for the final flushes. But now there is a smarter way of handling water. The small batch size of Tetra Pak® Ingredients Dissolver requires only a small amount of water each time so you can avoid adding too much water in the pre-dissolving steps. 

One pump – three functions

One pump – three functions

Fewer components mean simpler maintenance

One frequency driven pump is used for mixing, product transfer to downstream equipment and CIP discharge. This reduces the need for maintenance to one major component. There is no agitator or other moving parts to be replaced inside the tank in case of wear or physical damage. All that’s needed to drive the unit is one external pump. What’s more, the entire unit, especially the pump, is easily accessible for maintenance at ground level.

Ideal for research purposes

Ideal for research purposes

The flexibility to test new recipes

Ever wanted to test radial jet mixing on a small scale? The 250-litre batch size of this small unit makes it ideal for research purposes to test new recipes. This unit is your opportunity to give radial jet mixing a whirl, perhaps before investing in a larger radial jet mixer such as Tetra Pak® Radial Jet Mixer S or T for installation in tanks or the batch mixers Tetra Pak® Mixer RJCI 4X or Tetra Pak® Mixer RJCI B. Think of this small unit as a stand-alone pilot mixing tank. 

Options

Suction spear

Suction spear

Fast emptying without heavy lifting

We see a clear trend in the industry moving away from small ingredient packaging formats. These sizes are becoming less attractive for beverage manufacturers due to efficiency and waste reasons. More and more, we see a shift to bigger package formats like bulk bags that are too heavy to be lifted by operators and demand alternative ergonomic solutions. Our spear allows you to aspirate powders by suction in a similar way to how a vacuum cleaner works. This means no more lifting of heavy bags and less powder dust. The spear works for both wet and dry applications and empties bags from ground level.

Venturi-driven injector

No clogging with our injector technology

Clogging is a familiar challenge with certain powders including gums, thickeners and stabilisers. Our patented injector that is an integral part of the optional suction spear revolutionises the dissolving process because it has a special geometry combined with a vacuum. The circulating liquid stream inside the tank is formed so that both dry and wet ingredients are enveloped by liquid immediately on entry. This prevents product from settling and clumping contributing to a fully homogeneous dissolved product.

 

Washing function

Washing function

For fast rinsing of jerry cans

As an option when emptying jerry cans, a small arm with water jets can be connected to the water supply line and installed inside the tank. The water supply can be controlled with a manual valve. This “washing function” allows barrels or jerry cans to be washed out directly after emptying. It means that product residues can be rinsed off and the barrel or jerry can is emptied completely in a shorter time. This option also reduces any losses of valuable ingredients.

Explore our mixing range

Tetra Pak Mixer RJCI B

Tetra Pak® Mixer RJCI B

Tetra Pak® Mixer RJCI B

Tetra Pak® Mixer RJCI B is ideal to mix a wide variety of ingredients in an efficient way and to prepare a pre-mix, syrup or beverage.

Autonomous ingredient dissolver

Autonomous ingredient dissolver

Autonomous ingredient dissolver

Equipment for preparation of pre-batches consisting multiple high volumes of dry ingredients.

Batch dissolver

Tetra Pak® Batch dissolver

Tetra Pak® Batch dissolver

Tetra Pak® Batch dissolver is a a low-cost solution to dissolve crystalline bulks like sugar or dextrose in a discontinuous way.

Tetra Pak Radial Jet Mixer

Tetra Pak® Radial Jet Mixer

Tetra Pak® Radial Jet Mixer

Tetra Pak® Radial Jet Mixer nozzle forces liquid at high speed into the tank and creates turbulence. The liquid volume inside the tank becomes its own agitator.

Tetra Pak Preparation system B-EXT

Tetra Pak® Preparation system B-EXT

Tetra Pak® Preparation system B-EXT

Tetra Pak® Preparation system B-EXT flexible modular design is built to lead the market in lower product losses and reducing energy use.

Tetra Pak Preparation system B-ES

Tetra Pak® Preparation system B-ES

Tetra Pak® Preparation system B-ES

Tetra Pak® Preparation system B-ES flexible modular design is built to handle new products and capacities as production needs evolve.

Tetra Pak Mixer RJCI 4X

Tetra Pak® Mixer RJCI 4X

Tetra Pak® Mixer RJCI 4X

Tetra Pak® Mixer RJCI 4X handles 100% of ingredients in the soft drinks industry, for a wide variety of ingredient packaging formats with virtually no waste.

Tetra Pak Agitator IBC

Tetra Pak® Agitator IBC

Tetra Pak® Agitator IBC

Tetra Pak® Agitator IBC is specially designed for use with industry standard IBC containers. The unique design allows the IBC’s contents to be agitated consistently, and independently of liquid level.

Get in Touch with Us!

Service engineers training

Have questions about our solutions and products, or need some expert advice? Our friendly team is here to help! Just fill out the form, and we’ll get back to you as soon as possible.

  • 1 Purpose
  • 2 Request
  • 3 Contact

Purpose of contact

Please select one option

Business area of interest

Select one or more business areas
Please select business area of interest

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Specific area of interest

Please select one option

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Scope of request

Please select one option

Food category

    Please select one option
    Please select one option
    Please select one option
    Please select one option
    Please select one option
Please select one option

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Specific area of interest

Please select business area of interest

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest
Specific area of interest
Scope of request
Food category
  • 1 Purpose
  • 2 Request
  • 3 Contact

What describes your request the best

Please select one option
Please enter this field

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest
Message
Specific area of interest
Scope of request
Food category
What describes your request the best
Your role
  • 1 Purpose
  • 2 Request
  • 3 Contact

Company information

Please enter a valid work email
Please enter this field
Please enter this field
Please enter this field
Please enter this field
Please select one option
Please enter this field

Thank you for your interest

Your request has been submitted to our teams and we will be in touch shortly. Please click on the button below if you want to submit another request or if you have another query for us.