High shear mixing reduces the cost of mayonnaise production

The new range of high shear mixers for cold emulsion products from Tetra Pak gives the lowest cost per kilo of product on the market. How is this possible? We explore the key efficiency-enhancing aspects of the new mixer design.
Tetra Pak High Shear Mixer from above with white background

It all begins with ingredients being pumped or drawn into the mixing vessel by vacuum. When a vacuum is used, this also de-aerates the product quickly and thoroughly.

The ingredients enter an optimally-agitated vessel, rather than being fed directly into the high shear mixer head. This speeds up oil or powder incorporation to about five times the normal rate – saving on mixing time and energy consumption, in both production and cleaning.

Two-step mixing process

The new high shear mixer from Tetra Pak employs a unique two-step emulsification process, enabled by the patented Dynamic HS Mixing Head and agitator system.

The first step involves high flow and low shear to create a coarse emulsion, while the second involves high shear mixing to create a fine emulsion. Every detail of the mixing process can be precisely controlled – including speed, time and shear force – to achieve the desired product texture and droplet size, without any risk of over-shearing.

This means there is no need to worry about breaking down the emulsion or losing the functionality of costly ingredients like stabilizers.

Flexibility

This mixing solution can handle all types of emulsified sauces and non-emulsified sauces, with or without particles. It can be set up to produce wide range of capacities, in both batch and continuous mode. It can handle all type of ingredients, such as powders, liquids, even particles and blocks.

Guaranteed, consistent quality

With a high shear mixer from Tetra Pak, the product will always be properly mixed. This is thanks to the Dynamic HS Mixing Head mentioned above, which works in harmony with another innovation from Tetra Pak – the double-shaft agitator, whose counter-rotating blades enable good tank flow, resulting in a homogeneous product.

Take advantage of simulation tool

Tetra Pak has developed prediction tool software to allow producers to make the most of their high shear mixer’s performance. The prediction tool is a model that enables the fine-tuning of the mixing configuration and process parameters, according to recipes and requirements. By varying this palette of parameters, the output can be predicted and optimized – all at a negligible cost.

Creating new product recipes in a virtual environment, the prediction tool enables huge savings in the product development process.

Make more… and reduce costs further

Switching from a traditional mixer to a Tetra Pak® High Shear Mixer with a batch production set-up can generate overall savings of 20-40% per kg product. But of course, the more you produce, the greater the savings.

The good news is, when it’s time to scale up production, the design of the new range of high shear mixers makes it simple and cost-effective.

Production capacities for different operating modes  
Batch 3000 - 10,000 kr/hr
Batch Plus 4200 - 13,500 kr/hr
Continuous 8000+ kr/hr

You can expand from Batch to Batch Plus production by adding an inline mixing head to the outlet stream of the mixer. This not only boosts capacity but also increases efficiency further by combining the emulsification and emptying steps.

To scale up to continuous production, the only new components needed are control valves and flow meters on the ingredient inlets and the product outlet. These increase capacity and further reduce the production cost per kilo of product.

Arrange a trial

The new range of high shear mixers for mayonnaise and other cold emulsion products from Tetra Pak gives you rapid mixing, economical use of ingredients, complete control and unprecedented flexibility.

If you’d like to continue making an existing product (one that your consumers know and appreciate) but with lower production costs – or if you’d like to try out some new recipe ideas with a view to expanding your product range complete the form below and we will get in touch.

Fill in your details so we can get in touch:

Related articles

Mixing for a smooth, homogenous product​s

Mixing, a common operation in food processing, aims to efficiently achieve a smooth, homogenous product with consistent quality. Food processors, and consumers, insist on a perfect product every time. To achieve this, food processors must stay in complete control of every aspect of their production from beginning to end

Contact our sales team

Service engineers training

Our sales teams are happy to answer any sales or product queries. Please fill out our form so we can better be of assis tance.

  • 1 Purpose
  • 2 Request
  • 3 Contact

Purpose of contact

Please select one option

Business area of interest

Select one or more business areas
Please select business area of interest

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Specific area of interest

Please select one option

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Scope of request

Please select one option

Food category

    Please select one option
    Please select one option
    Please select one option
    Please select one option
    Please select one option
Please select one option

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Specific area of interest

Please select business area of interest

Contact our sales team

Summary

Purpose of contact
Business area of interest
Specific area of interest
Scope of request
Food category
  • 1 Purpose
  • 2 Request
  • 3 Contact

What describes your request the best

Please select one option
Please enter this field

Contact our sales team

Summary

Purpose of contact
Business area of interest
Message
Specific area of interest
Scope of request
Food category
What describes your request the best
Your role
  • 1 Purpose
  • 2 Request
  • 3 Contact

Company information

Please enter your email in this format: example@example.com
Please enter this field
Please enter this field
Please enter this field
Please enter this field
Please select one option
Please enter this field

By submitting this form, you confirm you have read and acknowledge Tetra Pak's privacy policy.

Thank you for your interest

Your request has been submitted to our teams and we will be in touch shortly. Please click on the button below if you want to submit another request or if you have another query for us.