Quick facts

The most consistent product quality

 

  • An even layer of chocolate covering the whole cone interior
  • A preserved crunchiness – no soggy cones
  • The exact and desired amount of chocolate in each cone

 

The most flexible and trouble free ice cream filler

 

  • Easy to change line capacity – no adjustments
  • Easy to switch equipment's and sub-units for fast product changeovers
  • Reliable and easy operation

 

Great savings by minimizing product losses

 

  • Reduced waste and better overall economy
  • The exact amount of chocolate every time
  • Saves up to 9 kilograms of chocolate per hour
ice cream filler a3 benefits
Tetra Pak® Ice Cream Filler A3

Highest flexibility with lowest TCO

  • Product flexibility and quick changeovers, without jeopardising quality
  • Costs minimized by high yield dispensing of cones, cups and lids; low give-away on chocolate spraying and ice cream filling
  • Efficient freezer and accurate ingredients doser combine to ensure low TCO
Tetra Pak® Ice Cream Filler A3

Features

Cone dispenser

For reliable, efficient dispensing

This dispenser is designed to operate reliably even when the cones used are not the highest quality or have, for example, folded edges. The cones are separated and dispensed from the stack, rather than being allowed to drop. This controlled action prevents the cones sticking together, as well as eliminating a number of other common problems.

Accurate chocolate sprayer

Reduces giveaway and saves money

Thanks to individual volumetric dosing, exactly the right amount of chocolate is sprayed into each cone. Just enough to chocolate can be used to coat the cone and protect it from moisture, but no more. An airless spray nozzle ensures an even distribution of chocolate.

Modular filling valve system

Modular filling valve system

Enables production of many different products

basic set up is a side-by-side filler for two flavours of ice cream with inclusions up to 10mm. With additional modules, these two flavours can be combined in a variety of ways. For example, in concentric, windmill, swirl, core ripple and outside ripple patterns - all with or without inclusions. The filling valve can of course run just one flavour as well.

Exchangeable nozzles

Exchangeable nozzles

Easy to produce a range of filling patterns

The filling nozzles are clamped on, and are to swap when you want to make a different filling pattern. For example, smooth surface, fluted surface, swirled surface, and swirled with ripple. Multi-rosette nozzles are also available for decorative effects.

Dynamic distribution

Dynamic distribution

Gives high dosing accuracy with low giveaway

The incoming ice cream is agitated while being divided into the number of lanes needed for filling. This, combined with highly accurate fill valve control ensures that exactly the right amount of ice cream is fed into each cone or cup, with a standard deviation below 1.5%.

Valve with back suction

Valve with back suction

Enables wet top decoration without quality issues

Individual top decoration valves with back suction make it possible to decorate your product with fruit sauce or chocolate, without drips. From a pump station the liquid is fed to the valves and dosed with a nozzle for a controlled amount of time. When ready, the last drops are sucked back into the nozzle to prevent mess.

Lid dispenser

Enables high flexibility and yield

Suction cups pick up the lids individually from a vertical magazine. Both the suction cups and the magazine itself are quick and easy to swap when you want to change to a different type and/or size of lid.

Cone sleeve crimper

Cone sleeve crimper

Locks the cone lid in position

When the lid has been placed inside the top of the cone sleeve, the lid crimper folds the paper down around the edges. It presses the excess paper firmly enough to lock it in position, so there is not risk of the lid coming loose. There is a crimping head for each lane, optimised – together with the lamella inserts - for the exact lid size.

Options

Exchangeable modules

Exchangeable modules

Enables production of cups, tops and squeeze-up tubes

By adding and removing certain modules, it becomes possible to make other products. If producing cups or tubs, a cup or tub dispenser replaces the cone dispenser. A pressing device– the equivalent of a crimping device for cones - is used to click the lids in place. On the other hand, a chocolate sprayer is not needed.

Dry ingredient dozer

Dry ingredient dozer

Enabling crunchy top decoration

A large range of dry ingredients can be dosed on top of the ice cream filling and topping sauce. The volume is “time-elapse” adjustable from the recipe.

Printer system

Printer system

Enabling date coding on all products

A carriage module enables the printer head to move across the product lamella and thus pass all lanes for each index. The printer - typically an ink-jet system – can print the desired text in up to three lanes.

Pick and place device

Pick and place device

For gentle product transfer at high speeds

In order to transfer products even more safely and efficiently to the hardening tunnel, you can exchange the belt outlet conveyor for a pick-and-place device. When defining the interface, the difference in distance between products at the ‘pick up’ and ‘place’ positions is fully flexible. The trailing movement is also synchronized with the tray tunnel to secure gentle product handling.

When we transfer with a Pick & place, we take an array of typically 4 x 6 cone products and move them from the filling machine over to the tray tunnel (extrusion line). The challenge is that the distance (pitch) between the products is not the same in the ‘pick-up’ position as in the ‘place’ position. Therefore the array changes distance between the products in 1 or maybe 2 directions, and they are always moved closer together in that transfer.

Insights

Top challenges for medium-sized ice cream producers, and how to overcome them

Top challenges for medium-sized ice cream producers

Tetra Pak Ice Cream Filler A3 - Reduced raw material costs, easy and reliable operation, flexibility for different products and low cost of ownership

Budget solution for ice cream filling

Budget solution for ice cream filling

There are a number of arguments for being cautious when choosing ice cream fillers with low investment costs

Ice cream filling machine with chocolate swirl

Don’t get blinded by complicated features

Every ice cream cones producer wants a sprayer that provides an even layer of chocolate inside the cone to isolate the biscuit from the ice cream

Ice cream cone with chocolate swirl, efficient chocolate spraying

No waste - reduced cost in ice cream filling

Reduced cost in ice cream filling with Tetra Pak Ice Cream Filler A3, a machine offering efficient and reliable ice cream production

Ice cream Product Development Centre

At the Tetra Pak Ice Cream PDC you can experiment with the latest ice cream processing solutions in a complete production environment at semi-industrial scale.

Explore our ice cream filling range

Tetra Pak Ice Cream Smart Filler  A1

Tetra Pak® Ice Cream Smart Filler A1

Fully automatic system for filling and decorating ice cream, sorbet and water-ice into cups, cones, squeeze-up tubes and small bulk containers of varying design, shape and size.

Tetra Pak Ice Cream  Robot Filler M1

Tetra Pak® Ice Cream Robot Filler M1

Tetra Pak® Ice Cream Robot Filler M1 is an advanced, semi-automated unit for filling ice cream tub products with flexible, artisan-like patterns.

Tetra Pak Ice Cream Choice Filler A1

Tetra Pak® Ice Cream Choice Filler A1

Fully automatic system for filling and decorating ice cream, sorbet and water-ice into cups, cones, tubs/family packs and other containers.

Tetra Pak Lid Unscrambler unit A1

Tetra Pak® Lid Unscrambler unit A1

The Tetra Pak® Lid Unscrambler unit A1 has a robust stainless steel design, a high level of automation and provides easy and ergonomic loading of lids.

Contact our sales team

Service engineers training

Our sales teams are happy to answer any sales or product queries. Please fill out our form so we can better be of assis tance.

  • 1 Purpose
  • 2 Request
  • 3 Contact

Purpose of contact

Please select one option

Business area of interest

Select one or more business areas
Please select business area of interest

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Specific area of interest

Please select one option

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Scope of request

Please select one option

Food category

    Please select one option
    Please select one option
    Please select one option
    Please select one option
    Please select one option
Please select one option

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Specific area of interest

Please select business area of interest

Contact our sales team

Summary

Purpose of contact
Business area of interest
Specific area of interest
Scope of request
Food category
  • 1 Purpose
  • 2 Request
  • 3 Contact

What describes your request the best

Please select one option
Please enter this field

Contact our sales team

Summary

Purpose of contact
Business area of interest
Message
Specific area of interest
Scope of request
Food category
What describes your request the best
Your role
  • 1 Purpose
  • 2 Request
  • 3 Contact

Company information

Please enter your email in this format: example@example.com
Please enter this field
Please enter this field
Please enter this field
Please enter this field
Please select one option
Please enter this field

By submitting this form, you confirm you have read and acknowledge Tetra Pak's privacy policy.

Thank you for your interest

Your request has been submitted to our teams and we will be in touch shortly. Please click on the button below if you want to submit another request or if you have another query for us.