Benefits


The use of the mix’s own turbulence avoids vortex or any breaking of the surface by a liquid jet or mechanical agitating device. It also ensures mixing that is exceptionally fast. This is because the liquid volume inside the tank is its own agitator, using turbulence to mix itself.  Tetra Pak Radial Jet Mixer mixes a standard beverage in 2-10 minutes after last ingredient is added.

A symmetrical mixing field, the absence of vortex, and between 6-100% more filling level flexibility together ensure homogenous distribution.


Capacity:

Available with single (S) or twin (T) mixing nozzles depending on the tank dimensions (tank is not included).

 

Ideal for batch mixes of up to 200 cP.


Applications:

For beverage products such as carbonated soft drinks, juices, nectars, still drinks, functional drinks but also for dairy and plant-based drinks.

Tetra Pak Radial Jet Mixer S and T
Tetra Pak® Radial Jet Mixer

Tetra Pak® Radial Jet Mixer

  • Boost your mixing and cleaning capacity​.
  • High product quality with low risk of foaming​.
  • Flexible solutions to meet your specific needs.
  • Low installation and maintenance costs.
Tetra Pak® Radial Jet Mixer

Features

Single or twin nozzle

Single or twin nozzle

Customized for your needs

Our mixer is available with a single (S) or twin (T) mixing nozzle depending on the tank dimensions. In both cases, the mixing nozzle creates steady turbulence through high-speed jets of liquid generated by a recirculation pump. It’s reassuring to know that the nozzle does not create high shear. The shear rate of an agitator is 100 times more at the blade tip than near one of our nozzles. This helps to preserve product quality.

Fast mixing

Fast mixing

Save time per batch

In a trial in a 20 cubic metre tank, we compared the batch time for a conventional agitator with Tetra Pak® Radial Jet Mixer T in the production of a cola drink. While the mixing time (after the last ingredient was added) for an agitator was 20 minutes, our mixer took only 6 minutes. Time for preparation could also be cut. The result: a time-saving of 24 minutes per batch. This is typical for beverage production.

Cascade cleaning

Cut the CIP cycle for sticky drinks

Watch the video from a tank at a plant in Paraguay! This innovation allows you to cut the CIP cycle for sticky drinks from 90 minutes or more to the time of a standard cycle for non-sticky soft drinks. The media enter through the spray ball and then are expelled as a powerful jet using the Tetra Pak® Radial Jet Mixer T for a faster and more efficient tank cleaning of juices, nectars and energy drinks, which are notoriously difficult to clean. 

Homogenous mixing every time

Ideal for ingredients that float or sink

Tetra Pak® Radial Jet Mixer T is ideal for mixing pulps, fibres and other floating ingredients. The turbulence forces them to be distributed in the batch. With taller tanks, powder and undispersed sediments tend to sink to the bottom. This is not a problem with our radial jet mixer. So you can mix powders in huge tanks without the need for a separate small-scale powder pre-mixer. Note that fibres, pulps and other floating ingredients are always added from the bottom.

Three stages in one mixer

Tetra Pak® Radial Jet Mixer T

The mixing nozzle of the T model has a horizontal and upper outlet opening. This allows mixing on a low and high stage. The stages are changed by switching the valve position of the mixing nozzle via air pressure. The CIP stage is achieved by increasing the speed of the pump and using the upper outlet opening of the mixing nozzle.

Simple to install and maintain

Simple to install and maintain

Make life easier right from the start

Just one flange needs to be welded into the tank bottom. No need to add several fittings inside the tank as with an agitator. Only one pump and a set of butterfly valves are needed and that means less components to install and less commissioning. What’s more, the pump is at ground level outside the tank for easy access. In comparison to an agitator, we estimate that you save more than ​17,300 euros ​just in the first two years through simpler installation (1), operation (2) and less maintenance (3)​.

Flexible batch size

Vary the mixing level to meet your needs

Fill low or high and always get the perfect mix. In fact, you can go as low as a 6% filling level for small batch sizes for research purposes or seasonal products. In comparison, an agitator needs a certain minimal filling level every time of about 30%. By choosing our radial jet mixer, high or low production runs can be mixed in the same size tank without problems. The mixer also works whether feeding ingredients from the top or bottom into your tank.

Options

Hopper

Hopper

Because everyone can forget sometimes

An optional hopper with a manual butterfly valve provides operators with the flexibility to add forgotten ingredients later at floor level in small amounts.

Explore our beverage mixing range

Tetra Pak Mixer RJCI B

Tetra Pak® Mixer RJCI B

Tetra Pak® Mixer RJCI B

Tetra Pak® Mixer RJCI B is ideal to mix a wide variety of ingredients in an efficient way and to prepare a pre-mix, syrup or beverage.

Tetra Pak Preparation system B-EXT

Tetra Pak® Preparation system B-EXT

Tetra Pak® Preparation system B-EXT

Tetra Pak® Preparation system B-EXT flexible modular design is built to lead the market in lower product losses and reducing energy use.

Tetra Pak Preparation system B-ES

Tetra Pak® Preparation system B-ES

Tetra Pak® Preparation system B-ES

Tetra Pak® Preparation system B-ES flexible modular design is built to handle new products and capacities as production needs evolve.

Tetra Pak Mixer RJCI 4X

Tetra Pak® Mixer RJCI 4X

Tetra Pak® Mixer RJCI 4X

Tetra Pak® Mixer RJCI 4X handles 100% of ingredients in the soft drinks industry, for a wide variety of ingredient packaging formats with virtually no waste.

Tetra Pak® Ingredients Dissolver

Tetra Pak® Ingredients Dissolver

Tetra Pak® Ingredients Dissolver

Tetra Pak® Ingredients Dissolver is in a class of its own for pre-dissolving ingredients especially for energy drinks, sport drinks and ice teas.

Tetra Pak Agitator IBC

Tetra Pak® Agitator IBC

Tetra Pak® Agitator IBC

Tetra Pak® Agitator IBC is specially designed for use with industry standard IBC containers. The unique design allows the IBC’s contents to be agitated consistently, and independently of liquid level.

Get in Touch with Us!

Service engineers training

Have questions about our solutions and products, or need some expert advice? Our friendly team is here to help! Just fill out the form, and we’ll get back to you as soon as possible.

Purpose of contact

Please select one option

Business area of interest

Select one or more business areas
Please select business area of interest

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest

Specific area of interest

Please select one option

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest

Scope of request

Please select one option

Food category

Please select one option
  • Please select one option
  • Please select one option
  • Please select one option
  • Please select one option
  • Please select one option

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest

Specific area of interest

Please select business area of interest

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest
Specific area of interest
Scope of request
Food category

What describes your request the best

Please select one option
Please enter this field

Get in Touch with Us!

Summary

Purpose of contact
Business area of interest
Message
Specific area of interest
Scope of request
Food category
What describes your request the best
Your role

Company information

Please enter a valid work email
Please enter this field
Please enter this field
Please enter this field
Please enter this field
Please select one option
Please enter this field

Thank you for your interest

Your request has been submitted to our teams and we will be in touch shortly. Please click on the button below if you want to submit another request or if you have another query for us.