What is retorting, and why is it done?

Retorting is a process where food is heat-treated inside the package. The heat treatment is applied to generate a commercially sterile product that is stable in ambient conditions prior to opening.

Can paperboard-based carton packages be retorted?

Yes, carton packages can be retorted just like tin cans, glass jars and plastic pouches. The retortable carton is a one-piece container that is filled unsterile and is processed after the container has been sealed. The flat carton-fed system enables filling of a large range of viscous product and particle sizes dependent on the type of filler and machine platform used. It has a laser perforation to enable easy full-top opening of the package.

How does the retorting process work?

Food preparation can include steps such as peeling, cutting, blanching, soaking, frying mixing and so on. The prepared food product can be filled into the carton package in one or multiple steps, depending on the food type and the selected filling solution.

After sealing, the carton package is then heat-treated in a retort, also known as an autoclave, to achieve a commercially sterile product.

At what temperatures is food retorted, and for how long?

The ultimate aim is to produce safe food products of high quality. So the temperature and retorting time required for a specific food product needs to be thoroughly evaluated before being implemented. Generally, 121.1°C is required for sterilization. For products with pH below 4.5, pasteurization temperatures can be applied. A normal retort process usually takes between 60 and 180 minutes in total.

Are all products heat treated in the same way?

The goal when retorting is to retain the highest possible product quality without compromising on food safety. By using the lowest possible temperature in combination with the shortest possible heating time, the product is kept fresh. Therefore, the heat treatment process is optimised for each product.

Learn more about the heat treatment process in our infographic Understanding heat treatment.

What food products can be retorted in carton packages? Are there any limitations?

Tomato products, beans, fruits, vegetables soups, ready meals, baby food and even petfood can be found in carton packaging today. The process is ideal for any food that can be sterilised or pasteurised to make it safe on a microbial level. Limitations relate to if the food can maintain its taste and freshness after heat treatment.

Are there alternatives to retorting for shelf-stable food?

Yes – a continuous processing line with aseptic filling of carton-based packages. This method is commonly used for beverages and dairy products but is also suitable for viscous foods. The food product undergoes heat treatment in a steriliser, before being filled in sterilised packages in a completely aseptic environment.

The main difference between these packaging solutions is that a retortable carton is constructed to fully process the product inside the package when sealed, while aseptic packaging maintains a product that has been fully processed before filling. Both packaging solutions include barriers to maintain high product quality during shelf life.

What does the packaging material for retortable carton packages consist of?

It is made of six layers: four of polypropylene, one of aluminium, and one of paperboard. Paperboard – a renewable material – makes up at least 69% of the package.

The structure enables the material to withstand water exposure during the retort process and provides a suitable environment for a wide variety of products, while meeting demands for a long shelf life.

What equipment is required for retorting carton packages?

The machine that heat-treats the package for sterilisation purposes is known as either a retort or an autoclave.

Steam water spray retorts are commonly used for retortable cartons. The retort equipment is standard for the industry, but the packages require a specific rack to enable an even heat treatment during processing, while maintaining the integrity of the packages.

During the retort process, it is important to maintain an outer overpressure high enough to balance the internal pressure in the package generated by the food product. Too low or lost pressure in the retort during processing will result in package deformation. Controlling the overpressure in the retort is important in all processing steps, including come-up, holding and cooling.

After retort processing, excess water on the packages is removed using a fan to dry the surfaces. The packages are then grouped into secondary packaging before being stacked on a pallet.

What are the benefits of carton packages for food products?

  • The rectangular shape takes up 25-40% less space on the supermarket shelf than cans and glass jars.
  • According to studies, consumers perceive cartons as a fresher package alternative.
  • Cartons are significantly lighter than cans, resulting in efficient transportation. One truckload of Tetra Recart® cartons corresponds to approximately nine trucks delivering empty cans or glass jars. Once the packages are filled, a pallet will hold 20 percent more food compared with a pallet with cans.
  • High quality printing on all sides creates opportunities for a billboard effect on the supermarket shelf
  • Laser-perforated tear opening and simple re-closure make the package easy for consumers to handle.
  • Tetra Recart carton packages are made of at least 69% renewable material (paperboard), while carbon emissions from Tetra Recart over the lifetime of the package are 81% lower than those of steel cans and glass jars. (Source:Life Cycle Assessment of food packaging, Europe 2017.)

Tetra Recart® carton packages

An innovative, future-proof packaging solution for shelf-stable foods, Tetra Recart® carton packages serves the evolving needs of consumers, producers, and retailers. Read more about our food carton packaging.

Tetra Recart packaging lines

Tetra Pak R1

Tetra Pak® R1

Tetra Pak® R1

Versatile, high speed up to 24,000 p/h and automated form & seal machine. Produces Tetra Recart® Midi range carton packages for heat-treated food.

Tetra Pak R1 line

Tetra Pak® R1 line

Tetra Pak® R1 line

Innovative machine features, an operator-friendly setup and FSC-certified packaging material – the robust and cost-efficient Tetra Pak® R1 line.

Tetra Pak R2

Tetra Pak® R2

Tetra Pak® R2

Compact, configurable and integrated fillers, flexible machine, easy format change. Produces Tetra Recart® Mini & Midi carton packages for heat-treated food.

Tetra Pak R2 line

Tetra Pak® R2 line

Tetra Pak® R2 line

Get efficient production and easy operation with the Tetra Pak® R2 line - a flexible, compact, retort carton packaging line.

Learn more about Tetra Recart

Tetra Recart packages on shelf

The science of differentiating your food product on the supermarket shelf

Your food package needs to do more than just stand out to make it from supermarket shelves to consumers’ baskets. Discover the secrets of product differentiation with our packaging design expert Jonas Eklund.

Switch from cans to cartons

Ready to switch from cans to cartons? We have everything you need

The experts and equipment at the Tetra Recart Food Development Centre can help you meet consumer trends, accelerate your product development and optimise technical matters such as filling and sealing.

Oak plant and carton illustration

Why Tetra Recart is the environmentally sound alternative

Today’s consumers and producers are increasingly demanding food packaging that has less impact on the planet. Our infographic breaks down the four main reasons why Tetra Recart is the smart alternative for shelf-stable food.

Contact our sales team

Service engineers training

Our sales teams are happy to answer any sales or product queries. Please fill out our form so we can better be of assistance.

  • 1 Purpose
  • 2 Request
  • 3 Contact

Purpose of contact

Please select one option

Business area of interest

Select one or more business areas
Please select business area of interest

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Specific area of interest

Please select one option

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Scope of request

Please select one option

Food category

    Please select one option
    Please select one option
    Please select one option
    Please select one option
    Please select one option
Please select one option

Contact our sales team

Summary

Purpose of contact
Business area of interest
  • 1 Purpose
  • 2 Request
  • 3 Contact

Specific area of interest

Please select business area of interest

Contact our sales team

Summary

Purpose of contact
Business area of interest
Specific area of interest
Scope of request
Food category
  • 1 Purpose
  • 2 Request
  • 3 Contact

What describes your request the best

Please select one option
Please enter this field

Contact our sales team

Summary

Purpose of contact
Business area of interest
Message
Specific area of interest
Scope of request
Food category
What describes your request the best
Your role
  • 1 Purpose
  • 2 Request
  • 3 Contact

Company information

Please enter a valid work email
Please enter this field
Please enter this field
Please enter this field
Please enter this field
Please select one option
Please enter this field

Thank you for your interest

Your request has been submitted to our teams and we will be in touch shortly. Please click on the button below if you want to submit another request or if you have another query for us.