Données clés
Tetra Pak Unité de basculement des sacs NEP est conçue pour le Tetra Pak® High Shear Mixer Mélangeur à fort taux de cisaillement doté d'un système d'aspiration ou tout type de lot de poudre et de processus de mélange de liquide. Un filtre d'extraction de poussière séparé garantit un contrôle efficace des poussières au niveau du point de basculement. La porte d'accès est automatiquement verrouillée avant le lancement du cycle NEP. Lorsque le cycle NEP commence, toute l'unité est nettoyée avec une seule bille de pulvérisation qui dirige les jets de l'eau de nettoyage vers toutes les parties internes de l'unité.
Capacité
Conçue pour des sacs de poudre de 25 kg. Jusqu'à 3 000 kg/h selon la capacité de travail de l'opérateur.
Volume de stockage : 120 litres.
Applications
Lorsqu'un nettoyage automatique assurant un haut niveau d'hygiène est nécessaire, notamment dans les industries travaillant avec des allergènes, des saveurs ou des colorants.
Caractéristiques
Wet CIP nozzle
CIP is built in as standard
A single nozzle cleans all surfaces inside with cleaning agents and water at temperatures up to 90°C. Wet CIP is the only efficient way to remove every trace of flavour, colourant or allergen residue. CIP is the choice if you want to maintain high standards of hygiene. With this tipping unit, CIP is built-in from the beginning. This is a standard unit designed as an extension for your batch mixer. What’s more, we can offer it at a standard cost.
Unique shape
Shape ensures good flow of powder
The inside surfaces slope at an angle to ensure correct powder flowability down to the outlet. The corners of the unit are smooth and rounded, and there are no dead-ends where powder can be trapped. This ensures complete discharge without retention of powder. What’s more, the unique shape ensures complete liquid drainage from the wet CIP cycle. The body of the unit is made of food-grade 316L stainless steel.
Flexible discharge
Choice of downstream connections
This unit is suitable for Tetra Pak® High Shear Mixer with a vacuum system or any kind of batch powder and liquid mixing process. Therefore you have the flexibility to connect this bag tipping unit using:
- Vacuum mixer powder feeding
- Venturi powder incorporation
- Non-vacuum mixer - powder gravity feed
Ergonomic handling
Practical tipping position
The table height is 87 cm from the floor. This is the best design compromise to achieve an ergonomic table height while at the same time giving the unit a sufficient storage volume (more than 100 litres).
The table folds down for better access inside if necessary. The door folds up and out of the way so the operator does not bang his or her head on it. The sides are inclined away from the operator so they do not get in the way of arm movement.
Automatic door lock
Door is locked during the CIP cycle
The safety mechanisms built into the tipping unit enable the use of hot water and detergents in a safe manner because operators cannot open the unit during the CIP cycle. Another safety device makes it impossible to accidentally disconnect the downstream pipe during cleaning-in-place.
Options
Dust extraction filter
Protect workers from airborne dust
The tipping unit can be connected to your existing dust extraction system or we can supply a dedicated dust filter system. Both these systems are designed to start automatically when the door is opened in order to protect operators from airborne dust.
Hot air dryer
For automatic drying after CIP
Automatic drying is available as an option by connecting a hot air dryer via an existing inlet. In this way, you can keep the unit closed during drying. There is no need to open the unit for drying manually with a tissue or cloth with the associated risk of contamination. Our automatic drying option gives you a more hygienic alternative to manual drying or to leaving Tetra Pak Bag Tipping unit CIP open to dry overnight. You also release more time for operators to do something else instead of drying.
Valve on dust connection pipe
Avoid cleaning of the dust pipe
The standard solution for the CIP system is to clean not just the unit but the upstream and downstream pipes. This is to ensure that no dust residue can find its way back into the cleaned tipping area. However, as an option, you can choose to isolate the downstream connection pipe using a sanitary butterfly valve. This prevents cleaning of this dust pipe using CIP.
