利乐®分离机——高效脱脂

优势

利乐®分离机可确保高产能以及高效脱脂。平稳、柔和的产品处理可提高脱脂效率，减少能耗。分离机可防止生产过程中进入空气，从而保证了产品质量。

气密（AirTight）技术采用完全填满的分离机钵体。先进的牛奶输入口和输出口设计保证了整个分离过程中的柔和处理。

概览

用于从牛奶中热分离或冷分离奶油的设备单元

产能

产能：热牛奶分离的产能介于7000-75000升/小时之间，冷牛奶分离则介于10000-50000升/小时之间。

应用

牛奶

Tetra Pak® Separators

AirTight design for high profitability

Excellent product quality since hermetic seals prevent intake of destructive air
AirTight technology enables superior separation efficiency
Separator designed for unmatched flexibility in both capacity and recipe range

特点

Hermetic inlet seals

Superior separation and energy efficiency

Outside the unit, the piping is connected to a rotating spindle by hermetic seals. This prevents any air from entering the separator and any product from leaking out. The absence of air in the separation process minimizes the reduction in fat globule size. It enables better separation efficiency at a lower rotation speed and hence lowers energy consumption.

Hollow spindle

Gentle treatment safeguards product quality

By contrast to competing separators, in Tetra Pak® Separators the product enters the bowl smoothly and accelerates gradually as it passes through the rotating spindle. This, combined with the absence of air in the system, means the product is handled gently. It also ensures that the size of fat globules and particles is maintained.

Corrosion resistant bowl

Increases bowl lifetime, saves money

The use of Duplex and Super Duplex steel for our bowl material offers a high resistance to corrosion and therefore extends the lifetime of the bowl. We offer a 10 year guarantee on bowl material for all AirTight Design Separators.

Hermetic outlet seals

Maintains product quality

The product exits the separator via hermetic outlet seals. This prevents overflow and the unwanted mixing of skimmed milk and cream. It also prevents unwanted air entering the machine, which could split the fat globules, leading to free fat and possibly also free fatty acids (FFA) as well as product foaming downstream.

Product discharge pumps

Enables flexibility and low energy consumption

The product leaves the separator through two rotating pumps: one for skimmed milk and one for cream. The use of pumps - as opposed to paring discs - makes it possible to run a wide range of capacities in the same machine without any mechanical alterations. It also increases energy efficiency.

选项

Encapt (TM) technology

Revolutionary energy-saving technology for high-capacity separators

By lowering pressure and reducing air friction around the separator bowl, Encapt^TM cuts the energy consumption of a Tetra Pak^® Separator with AirTight technology by up to 40% compared to other separators.* This improves both operational cost and environmental impact. It is achieved through a combination of a low-pressure pump, discharge pump, water lock and hermetically sealed outlet

*Numbers refer to a production scenario of hot milk skimming at 55 000 l/h including feed and booster pumps.

INSTAL module

Decreases installation time

The INSTAL module is delivered as an assembled and pre-tested unit ready for production.

Consists of:

Stainless-steel frame
All peripherals necessary for operations
Assembly and pre-testing

Polynode Disc

Major breakthrough in separator disc technology enables higher capacity and higher performance.

Innovative, one-piece disc construction means the separator can accommodate more discs, increasing separation surface and improving skimming performance. Eliminating traditional welded spacers and replacing them with streamlined, machine-embossed polynodes enables increased stability, higher flow rate and improved performance.

Today, available for hot milk skimming at high capacity – Tetra Pak^® Separator H80.