适用于利乐传统包®无菌包装的利乐®A1灌装机

您是否正在寻找一种易于操作的可靠灌装机？适用于利乐传统包^®无菌包装的利乐^®A1灌装机采用可选的高粘度无菌(HVA)套件，设计用于高效生产液态和粘性食品。最高可实现2.16万包每小时的生产能力以及高效利用水电能源，具体产能取决于包装规格。

该设备操作简便，可独立运行，并在六种不同包装规格间轻松切换，保障您的投资。通过降低用水量、降低能耗和减少废弃物，实现低运营成本和高环保绩效的优势¹。它为利乐传统包^®无菌包装提高了食品安全性，且投资较少。优化运营效率、降低成本并强化您的可持续发展品牌形象。

适用于利乐传统包^®无菌包装的利乐^®A1灌装机配备了高粘度无菌(HVA)套件，支持包装番茄酱、涂抹型奶酪和其他高粘度产品。该设备还支持在高粘度和低粘度生产之间轻松切换。该解决方案与能够处理各种粘度的产品的利乐^®巴氏杀菌设备PF配套使用，即可完美衔接加工和包装工序。

为生产带有易拉贴™的利乐传统包^®无菌包装20标准增值型，灌装机在包装创建过程中使用集成技术来贴装易拉贴。

为什么选择适用于利乐传统包^®无菌包装的利乐^®A1灌装机

操作简单

最大限度地提高效率。适用于利乐传统包^®无菌包装的利乐^®A1灌装机的操作劳动强度较低，一人即可轻松操作，支持长时间生产运行。受益于稳定的正常运行时间、运营控制和高产量。

少投入多产出

降低运营成本并提高环保绩效¹。高效的水电能源利用率可降低运营成本。减少用水量、能耗和废弃物

灵活的生产

扩展您的产品系列。该设备支持在6种包装规格间轻松切换。可选的产能设置使生产线能够运行大部分规格，并可将速度降低高达35%以适应生产需求。

特点

Automatic Strip Splicing

Quality splicing

Enables correct, repeatable splicing of longitudinal strip reels, and at the same time makes the operation less labour intensive. The reels are exchanged approximately every 1.45 hours.

Operator panel

It’s never been easier to operate

The production is easily managed through a Tetra Pak Operator Panel (TPOP) system on the ground level. All major functions can be initiated and supervised - from production preparation to the Cleaning in Place (CIP) function.

PLMS Centre

Operational control and performance analysis

The packaging line monitoring system (PLMS) enables tracking of production performance, such as possible stop reasons, efficiencies, waste levels.

Packaging material in-feed

Long production runs raise efficiency

Each Tetra Pak A1 unit holds a jumbo reel of packaging material with sufficient supply for almost two hours of production at the higher speed, and about three hours at the lower speed. A jumbo reel holds sufficient material for up to 36,000 packages.

Fully automatic splicing unit

Neat seal between reels

The splicing unit heats and pressurises the packaging material to automatically make a neat seal between one reel and the next, so package production can continue uninterrupted.

Aseptic system

For reliable sterilisation of packaging material

Consists of a shallow hydrogen peroxide bath, squeegee rollers and a heating chamber. Rollers distribute the hydrogen peroxide evenly; controlled heating and evaporation give effective sterilisation. Control of aseptic parameters ensures product protection and minimises the risk of operator errors.

选项

HIGH VISCOSITY ASEPTIC (HVA) KIT (Tetra Pak A1)

The HVA kit makes it possible to fill viscous products such as tomato paste.

This is made possible by a synchronous aseptic positive pump which is controlled by the double loop filling control system of the Tetra Pak A1 filling machine. The unit can be connected or disconnected as needed, so producers can alternate easily between viscous and other kinds of products.