Vorteile
Der Tetra Pak® Fassentleerer ist besonders flexibel und zum Entleeren flüssiger Zutaten aus Fässern, Behältern oder Tanks in ein nachgelagertes System mittels einer Pumpe geeignet. Die Pumpe ist über einen Schlauch an eine Sauglanze angeschlossen. Das mechanische Ausgleichssystem sorgt für eine ergonomische Handhabung der Sauglanze. In den Konzentratfässern verbliebene Rückstände von Zutaten können mit einer Wasserdüse ausgespült werden. Die Wasserinjektionstechnologie ermöglicht die Fluidisierung von zähflüssigen Zutaten direkt am Kopf der Sauglanze. So steigen die Durchflussraten und die Entleerungszeiten werden erheblich verkürzt.
Der Tetra Pak Fassentleerer ist mit zwei unterschiedlichen Pumpentypen und in zwei Größen erhältlich.
Leistung:
Entleeren von Fässern mit einem Fassungsvermögen von bis zu 200 Litern.
Die maximale Viskosität des Konzentrats für DN 50 beträgt 10.000 cP.
Die maximale Viskosität des Konzentrats für DN 65 beträgt 30.000 cP.
Typische Anwendungen:
Entleerung verschiedener flüssiger Zutaten:
- Fruchtkonzentrate
- Zutaten auf Haferbasis
- Pasten (z. B. Tomatenpaste)
- Säfte mit Fruchtfleisch und Fasern
- Öle
- Aromen
- und vieles mehr
Efficient drum emptying for a wide range of liquid ingredients
- Viscous ingredients flow faster thanks to water injection technology
- Reduce batch preparation time for operators
- Better ergonomics for easier handling
Merkmale
Water injection technology
Get viscous ingredients to flow faster
Water injection technology fluidizes viscous ingredients locally at the suction head of the lance so they flow faster – up to two times faster depending on the amount of water injected. A small amount of water is added, which is monitored by a flow meter so the amount can be taken into account when following a recipe. This technology allows a lance diameter of just 66 mm compared to about 100 mm normally needed for viscous ingredients.
Small lance diameter
Lance and hose are almost 50% lighter
Water injection technology allows a lance diameter of just 66 mm compared to bigger lances and hoses with the same capacity but without water injection. We calculate that a 66 mm diameter lance with a 5.5 m hose full of concentrate weighs 48 kg. In comparison, a lance and hose of the same length but with a diameter of 100 mm weighs 95 kg when full. Our 66 mm diameter lance and hose therefore weigh almost half, making them much lighter to handle.
Patented suction check valve
Prevents liquid backflow and suction of inlay
Normal non-return valves can affect the efficiency of aspiration by causing a pressure loss, but our unique valve gives minimal pressure loss so the unloader works at a high capacity. You get the benefits of a non-return valve to prevent liquid backflow plus suction is cut off when all the product has been emptied into the lance at the end of unloading the drum. Operators can empty the drum completely and the drum inlay cannot be aspirated by mistake.
Weight balancing system
For ergonomic manual handling
As standard, there is a weight balancing system for manual positioning of the lance with overhead mechanical support. Only a little manual effort is required to move the lance, thus ensuring smooth handling for operators.
No tipping or lifting of the drums is required as the drums can be unloaded while standing on the floor or on a pallet.
The hose never touches the floor so there is no tripping hazard or risk of damage from trucks.
Unloading at floor level
No tipping of dirt into your product
Do you know about the risks of tipping drums into a tank? Inlays, foreign matter or dirt stuck on the outside surface of the drum can fall off and drop into the product, especially if the tipping arm shakes the drum. Avoid this problem completely with our floor-level solution for unloading. Furthermore, inlays can’t be aspirated with our lance because the suction check valve prevents accidental suction of the inlay or parts of it.
