メリット
テトラパック® チーズバット OO CH9 は、質の高いチェダーやモッツァレラタイプのチーズを製造するために特別に設計されています。バットには、制御された予測通りのプロセスに必要なすべての機能が備わっています。これには、チーズミルクの充填、材料の混合、牛乳の凝固、凝塊の切り分け、撹拌、間接的な加熱、放出、および CIP 洗浄が含まれます。
Flexible, controlled curd production
- Reliable equipment, designed to counter problems of thermal stress and lengthen service life
- Patented knife design and gentle heating keep product losses down
- Vertical vat design enables the production of a wide variety of cheese types
特長
Unique knife & frame design
Reduces mechanical stress and increases hygiene
The knives are only welded at one end of the knife frame, which gives the system a degree of elasticity, and reduces the risk of bending or breaking. This enables a longer lifetime, as well as increased repeatability. Furthermore, our unique design has been shown to reduce losses of fats and fines, and to inhibit the build-up of curd during production, thus enhancing hygiene.
Dimple heating jacket
Improves heat transfer and control over the heating process
The curd/whey mixture is heated (or cooled) by a dimple jacket filled with hot water, which is wrapped around the bottom of the vat (with an option to have it wrapped around the side walls of the tank body, if needed). This method can achieve the same heat transfer effect as steam heating, but with a lower temperature. Moreover, the temperature is easier to control, thereby reducing fouling and denaturation of the whey proteins.
Stable Vat design
Increases equipment lifetime
Over time, frequent heating and cooling of the vat can lead to cracks. Our vat design takes these temperature fluctuations into account. The critical areas are designed to allow a degree of movement, which reduces the risk of cracking and increases the lifetime of the equipment. In addition, the inner and outer wall of the tank are heated at the same time, allowing the vat to expand evenly.
Control system
Optimizes production of all cheese types
The control system can be used independently or fully integrated into your plant control system. Based on an analysis of the data generated, you can fine-tune your production to meet your priorities – such as preventing product waste or reducing processing time. It helps you get the best quality end product with the most efficient process, while allowing the maximum freedom to adapt recipes.
Vertical shafts
Increases the number of possible products
Thanks to the double vertical shaft, it is possible to work with a wide variety of filling levels. This expands your freedom to produce different cheese types without compromising the equipment’s performance.
