L'innovazione è alla base di ciò che facciamo e l'aspetto che ci consente di realizzare sempre tecnologie all'avanguardia. L'unità Tetra Pak® Direct UHT è la nostra innovazione più recente nell'ambito delle tecnologie asettiche, progettata per aiutarti a ottimizzare la produzione e soddisfare le esigenze di un mercato in continua evoluzione.
Direct UHT, per qualità e flessibilità
In Tetra Pak, siamo specializzati in entrambe le tecnologie UHT più importanti, quindi siamo in grado di concentrarci sulla soluzione che ti fornirà i risultati che desideri. L'unità Tetra Pak® Indirect UHT fornisce efficienza imbattibile per cicli di produzione lunghi e con una qualità del prodotto molto elevata. Tuttavia, se desideri la massima qualità del prodotto, l'unità Tetra Pak Direct UHT è la scelta ideale. Questa soluzione garantisce i massimi livelli di qualità e una straordinaria flessibilità per gestire un'ampia gamma di prodotti.
Tecnologia UHT diretta all'avanguardia
Grazie al trattamento UHT diretto, il carico termico sul prodotto alimentare è minimo, preservando quindi la qualità complessiva e i valori nutrizionali e riducendo l'impatto sul gusto. La nostra tecnologia UHT diretta all'avanguardia è estremamente flessibile, con oltre 100 opzioni e alcune soluzioni di riscaldamento combinate.
Steam injection
Direct steam injection gives you instant heating from 80°C (application dependent) to the UHT temperature, followed by temperature equilibrium and instant condensation, all thanks to the ring-nozzle steam injector. Heating and cooling of the product is practically instantaneous. That’s how our direct UHT technology creates commercial sterility while applying very little heat load to your products. This results in less chemical changes and therefore a final product more similar to the original unprocessed product. There are less colour and taste differences than with indirect UHT technology as well as less effect on nutritional values.
Steam infusion
Tetra Pak Direct UHT unit is available with either injection or infusion or both. When it comes to formulated products such as whipped cream containing stabilizers, steam infusion offers certain benefits. The basic principle of steam infusion is to heat a product by passing it through an atmosphere of steam. You will get the same high quality UHT product with infusion as with injection, but with less shear. This gives greater stability for shear-sensitive products. However, on the cost side, infusion gives you a 4-8% higher operating cost than injection because the process requires more steam and cooling water and results in slightly higher product losses.
Flash cooling
The condenser is a separate unit. This allows it to operate at a higher temperature level (outlet water: up to 72°C compared to 65°C before). You do not have to use expensive ice water to fine-tune the temperature in the condenser cooling circuit, giving you lower energy costs. In addition, the separate condenser is easier to clean and service.
Combined heating solutions
Instead of buying two different units, you can purchase a ready-made combi model offering either injection or infusion or both. You can also choose equipment to manage both direct and indirect heating methods. Choose the heating solution that suits your products best and adapt it easily if your needs change in future because flexibility is built in. There are three modes to choose from:
Direct UHT mode - For “added value” products and superior product quality.
Plus mode (combining direct and indirect heating) - For longer shelf life and optimized economy.
Indirect mode - Lowest operating cost and environmental impact. For longest possible shelf-life and long running time.
Automatic homogenizer damper
Homogenizer dampers absorb pressure variation and shocks before and after the homogenizer. Automatic air refill maintains the air cushion in the homogenizer damper to ensure smooth operation. Without the air cushion, vibration and cavitation would occur and shorten the running time. Fully automated CIP is included - increasing operator safety, improving hygiene and further optimizing the production cycle.
Floating protection system
Aseptic product in the inner tubes of the Tetra Pak® Tubular Heat Exchanger flows at a higher pressure than the untreated product on the shell side. A floating protection system allows for thermal expansion of the tubes, greatly reducing the risk of damage from cracking, and consequent loss of sterility. In addition to improving food safety, this feature extends the lifetime of the heat exchanger.
Low-loss balance tank
Due to a very specific solution of the inlet valve arrangement of the balance tank, we have managed to reduce the mixing phase of the product. Other improvements apply to the inlet solution which carries an electronic level control. The frequency-controlled product pump is also linked to this device. In addition, a frequency-controlled pump will have a lower energy consumption.