主なデータ

テトラパックスプレードライヤートールフォームバッスルは、熱に敏感な粉末を高いレベルでスプレー乾燥する連続システムです。 一般的に、WPC80、WPI、スキムミルク、ミネラル、加水分解タンパク質などの製品に最適です。
 

処理能力

1 時間あたり 0.5 ~ 10 トンの粉末を製造。
 

用途:

WPC80、WPI、スキムミルク、ミネラル、加水分解タンパク質などの製品に最適です。 通常、蒸発、結晶化、粉末処理を含む完全なテトラパックラインソリューションに統合されています。

トールフォームバッスル
テトラパック® スプレードライヤートールフォームバッスル

熱に敏感な粉末の高品質なスプレー蒸発乾燥用の連続システム

  • 固くならない非吸湿に優れた高品質な粉末を製造
  • 柔軟な製品の幅とパウダー機能で、お客様の製品ニーズに合わせたカスタマイズされた乾燥
  • 最適な結果を得るために、完全なテトラパックラインソリューションに統合するメリット
テトラパック® スプレードライヤートールフォームバッスル

特長

Straight tube air distributor

Straight tube air distributor

Straight tube air distributor (STAD) with integrated high-pressure nozzle assembly 

  • Single or multi venturi air distributor evenly distributes drying air at relatively low pressure drop, minimising electricity consumption
  • Modular design enables multiple venturi deployments as dryer capacity increases, ensuring standardised atomisation conditions
  • Chamber roof cooling system minimises powder deposits (bearding) and prevents overheating of any deposits that do form
Swivel adjustable lances

Swivel adjustable lances

Swivel adjustable lances for improved safety

  • Easy and accurate process adjustments and enhanced operator safety through short lances and side-mounted placement
  • Each air distributor has integrated high-pressure nozzle assembly and optional fines return capability
  • Depending on required functional properties, fines separated from exhaust air can be reintroduced in the atomising zone
Tetra Pak® Shaking Bed

Tetra Pak® Shaking Bed

Tetra Pak® Shaking Bed for single- and multi-stage drying

  • Single- and multi-stage drying of agglomerated and non-agglomerated products
  • Allows gentle after-drying and after-cooling of delicate products
  • Shaking motion improves air/solids contact for superior mixing and higher thermal efficiency
  • Depending on product type, the product passes through a static bed, a well mix shaking bed and plug-flow drying and/or cooling bed
Tetra Pak® Bag Filter

Tetra Pak® Bag Filter

Optimal powder particle separation with Tetra Pak® Bag Filter

  • Separates powder particles in exhaust air of spray drying installation
  • Dislodges deposits with compressed air and pulses them into fluidising cone
  • Filtered air leaves top of bag filter via clean air side and is discharged via exhaust fan
  • Designed for maximum product yield, low emissions and competitive total cost of ownership

オプション

Middle pressure fines transport system

Middle pressure fines transport system

Middle pressure fines transport system for recovered fine powder

  • Conveys fine powder recovered from cyclone/s and/or baghouse to:
  • Dryer for entry to the atomising zone for agglomerated/instant or dustless products; or
  • Start of shaking or fluid bed for regular products and when no agglomeration is required; or
  • Discharge end of shaking or fluid bed for emptying and shut down
  • If required, the fines’ destination can be changed mid-run by valve adjustment
Multiple feed systems

Multiple feed systems

24/7 production with multiple feed systems

  • Multiple concentrate feed systems allow concentrate tanks, heaters and high-pressure pumps to be independently rotated and cleaned
  • Supports round-the-clock production if desired
  • Changeovers of lines feeding high-pressure pumps are by water flushing the feed system – a setup that eliminates product loss
  • Post-production line immediately flushed and cleaned when product diverts to clean high-pressure concentrate line
Spray monitoring system

Spray monitoring system

Spray monitoring system for full control

  • Continuously monitors spray pattern of high-pressure nozzles to ensure safe spray drying and prevent nozzle leakage or product build-up on nozzle tips
  • Consists of camera system connected by fibre optic cable to a PC monitor
  • Supports maximum air inlet temperature of 280˚C
  • Camera cooling system at top of drying chamber
Exhaust air heat recuperator

Exhaust air heat recuperator

Exhaust air heat recuperator for energy optimisation

  • Transfers energy from dryer exhaust air to dryer inlet
  • Placed after bag filter and can be combined with exhaust noise attenuator
  • Hygienic design for full cleanability and optimal heat transfer
  • Design takes account of exhaust air condensation levels

テトラパックのスプレードライヤー製品ラインアップを確認する

テトラパックスプレードライヤーワイドボディ

テトラパック® スプレードライヤーワイドボディ

テトラパックスプレードライヤーワイドボディ(WB)は、完全に自動化された連続動作するスプレー乾燥システムで、乳製品、ホエー、植物性由来の粉末に対応します。

テトラパックスプレードライヤートールワイドボディ

テトラパック® スプレードライヤートールワイドボディ

テトラパックスプレードライヤートールワイドボディ(TWB)は、栄養成分としての粉末を製造する完全に自動化され連続して動作するスプレー乾燥システムです。

テトラパックスプレードライヤープロラック

テトラパック® スプレードライヤープロラック

テトラパックスプレードライヤープロラックは、牛乳とホエー浸透粉末のための完全に自動化された連続動作するスプレー乾燥システムです。

バッグフィルター

テトラパックバッグフィルター

テトラパック® バッグフィルターは、乳製品やホエー由来の成分、栄養製品、様々な植物由来など、特に食品用途専用に調整されています。

テトラパック販売チームに問い合わせる

Service engineers training

製品に関するお問い合わせは、営業部門が承ります。 お問い合わせ内容を書式にご入力ください。内容に応じたサポートをご提供します。

  • 1 目的
  • 2 リクエスト
  • 3 お問合せ

お問合せの目的

1 つのオプションを選択してください

関心のある事業分野

1つ以上の事業領域を選択する
関心のある事業分野を選択してください

テトラパック販売チームに問い合わせる

概要

お問合せの目的
関心のある事業分野
  • 1 目的
  • 2 リクエスト
  • 3 お問合せ

関心のある特定分野

1 つのオプションを選択してください

テトラパック販売チームに問い合わせる

概要

お問合せの目的
関心のある事業分野
  • 1 目的
  • 2 リクエスト
  • 3 お問合せ

リクエストの範囲

1 つのオプションを選択してください

食品カテゴリー

    1 つのオプションを選択してください
    1 つのオプションを選択してください
    1 つのオプションを選択してください
    1 つのオプションを選択してください
    1 つのオプションを選択してください
1 つのオプションを選択してください

テトラパック販売チームに問い合わせる

概要

お問合せの目的
関心のある事業分野
  • 1 目的
  • 2 リクエスト
  • 3 お問合せ

関心のある特定分野

関心のある事業分野を選択してください

テトラパック販売チームに問い合わせる

概要

お問合せの目的
関心のある事業分野
関心のある特定分野
リクエストの範囲
食品カテゴリー
  • 1 目的
  • 2 リクエスト
  • 3 お問合せ

リクエストをした理由

1 つのオプションを選択してください
このフィールドに入力してください

テトラパック販売チームに問い合わせる

概要

お問合せの目的
関心のある事業分野
メッセージ
関心のある特定分野
リクエストの範囲
食品カテゴリー
リクエストをした理由
あなたの職種
  • 1 目的
  • 2 リクエスト
  • 3 お問合せ

企業情報

次の形式でメールアドレスを入力してください: example@example.com
このフィールドに入力してください
このフィールドに入力してください
このフィールドに入力してください
このフィールドに入力してください
1 つのオプションを選択してください
このフィールドに入力してください
1 つのオプションを選択してください

この書式を送信すると、あなたはテトラパックのプライバシーポリシーの内容を読み承認したことになります。

お問い合わせいただきありがとうございます

お客様のご依頼はチームに送信されました。近日中にご連絡いたしますのでしばらくお待ちください。 別のご依頼またはお問い合わせのある方は、下のボタンをクリックしてください。